What is the inside neck dimension on a properly sized .223?
2017年9月26日 · Are you referring to the lip that can occur at the case mouth as a result of being resized or are you suggesting that the neck of the 223 case is curved/tapered? If the latter, it is a simple matter to ream the inside of the case neck for 1/10 inch or so, thereby removing the lip and exposing the actual neck to measurement.
Rifle Cases... | The High Road
2007年9月28日 · Back when I first bought my Remington 700 VSF, I didn't have a rifle case to transport it in, and since it was my first "nice" rifle, I wanted a really good case to protect it. I wound up buying an SKB ATA Double Rifle Transport Case. I think I might have paid about $10 less for mine at my local...
Rifle case prep center? | The High Road
2012年3月21日 · I've been loading alot of 223 recently. I was using a plastic dial micrometer (I know, I know) and had to rim maybe 3 out of 10 cases measured on that...
Why pistol cartridges in a rifle? | The High Road
2016年11月8日 · The interchangeable pistol and rifle loads was handy, but the small calibers werent great for larger animals or longer range compared to the heavier calibers often used in single shots and the 76. We often describe it as pistol calibers in rifles, but the 44 WCF(44-40), 38 WCF (38-40) and 32 WCF (32-20) are and were rifle calibers adapted to ...
Sellier & Bellot Large Rifle Primer for .308 Win Update
2017年8月21日 · Calhoon was an interesting guy, who made interesting rifles, and wildcatted a bit. Yet saying: "With large rifle primers all being the same thickness [.027”]" was a generalization these threads have already proved untrue. It is common knowledge that the US military has their own rifle primer specifications.
30-30 brass, I begged Starline to make it! | The High Road
2017年5月28日 · I get better case life with mine by partial length resizing for each rifle so the brass will just chamber easily in it (I make a dummy round and set the die to that setting) and annealing every time. Lots of extra work but I get on average 10 reloads from a piece of brass so IMHO it is worth the bother.
309 JDJ cartridge vs .308 winchester | The High Road
2017年10月15日 · The only reason 309 JDJ exists is to suit the single shot contender action's pressure limitations. It is the highest power 30 caliber cartridge you can shoot in a contender. It would also be nice for any single shot or lever action rifle where a rimmed cartridge is preferred. I can see no benefit to it in a bolt action.
rifle case opinions | The High Road
2011年6月25日 · rifle case opinions. Thread starter plunge; Start date Jun 25, 2011; Status Not open for further replies. ...
So...AR's are NOT 'direct impingement' operating systems
2017年6月25日 · In each case, gas was vented from the barrel and impinged on a "cup" in the bolt carrier to actuate the action. In the AR-15, the gas is tapped from barrel and directed back to a gas block which then directs the gas to an interference mechanism (i.e the piston rings on the back of the bolt) that actuates the action.
Rechamber a tikka 7mm-08 to 280 rem AI? | The High Road
2018年4月27日 · So I've been thinking again (dangerous) about my next rifle, which will be a tikka t3 lite or t3x, and it will probably be 30-06. But what if I bought a 7mm-08 and then reamed it for 280 rem AI? I believe a mag swap and a shortened ejector would do it, or would I need new bottom metal and/or new stock?