EVAP canister vent control valve closed - Nissan Forum
2003年3月24日 · 0903 EVAP canister vent control valve circuit fault (California) 0905 Crankshaft postion sensor (CKP) fault and/or flywheel damage 0908 Insufficient coolant temperature for closed loop operation 1003 Transaxle range (TR) sensor fault 1005 EGR solenoid valve fault 1008 EVAP canister purge volume control valve fault (California)
2015 Versa - EVAP vent control valve location | Nissan Forum
2022年4月8日 · 3 - Charcoal Canister; 3 - Gas Cap Seal; 2 - Fuel Tank; 2 - Evaporative Emissions (EVAP) Canister Purge Solenoid/Valve; As you can see, the Purge Control can cause it but is very unlikely. The most likely culprit is a bad seal at the Vent Control Valve, which is located in the Evap Canister. There's a bulletin regarding that:
P1446, Auxiliary Emission Control | Nissan Forum
DTC P1446 EVAP CANISTER VENT CONTROL VALVE PFP:14935 Component Description UBS000BO The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized.
EVAP canister vent control valve closed | Page 2 | Nissan Forum
2003年1月22日 · SR-Series Engines (DE/VE) EVAP canister vent control valve closed. Jump to Latest
P1446 OBDII CODE - Nissan Forum
2005年1月18日 · DTC P1446 EVAP CANISTER VENT CONTROL VALVE PFP:14935 Component Description UBS000BO The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized.
P0456 vent control valve 2021 Rouge | Nissan Forum
2024年10月6日 · Replacement of vent control valve. Passenger side right before rear tire. Remove 7 plastic retaining clips from dust cover. The vent control valve is located right before the rear passenger tire. Remove electrical clip. Remove hose, turn valve slightly, pull valve straight out. Replacement is reversal of install.
emmision control question --pathfinder - Nissan Forum
2011年9月27日 · The EVAP system also has the ability to self-check by closing the vent control valve at the end of the carbon canister and opening the purge valve to put a vacuum on the system, which is sensed by the EVAP pressure sensor, which takes the vacuum signal and converts it into DC voltage which it sends to the ECM to let it know if the EVAP system ...
(Sorry, it's another) P1448 Evap Canister Vent Control Valve Question
2012年4月20日 · Jump to Latest 13K views 4 replies 3 participants last post by smj999smj Mar 25, 2013
Carbon Canister/Vent Control Valve - Nissan Forum
2006年9月26日 · So the dealer is saying that the valve malfunctioned and allowed liquid gas to flood the canister. It sounds plausible. I don't know what the alternative is to paying the $650. If it was me I'd get a junkyard canister and vent control valve, but it doesn't sound like you would want to traipse through a junkyard.
P0446 code on 2001 Sentra - Nissan Forum
2005年11月3日 · The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid (the EVAP canister vent control valve) responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal ...