Diary of a print / cut newbie: Roland Versacamm SP-300
2007年4月23日 · Advanced Search Cancel ...
Roland sp300v Print and cut cutting to the right - T-Shirt Forums
2015年9月2日 · Either the print and cut was never dialed in - some machine brand new are spot on and some will require an adjustment of more than 50. So you did 20 and think that is enough and not impressed - well maybe you simply needed more. That is just a fact of life. No one can tell you what your machine needs if you are standing in front of it.
Roland SP-300 Print Alignment Issue--Need Help - T-Shirt Forums
2015年11月17日 · We have a Roland SP-300 Print Cut machine, and are having alignment issues with the PRINTING. This happens uni-directional as well as bi-directional. We have made sure heads are clean, adjusted print, and calibrated per the manual, but the problem is still occurring. The problem appears to only happen when there is magenta and black in the design.
Plotter for Car Wrap - T-Shirt Forums
2018年3月20日 · A midrange plotter in the 30" inch range might be in the $700 range. A top of the line model might be in the $4000 range. A UsCutter MH 28" would be around $300. Obviously there is much variance here. A 30" print cut machine would be in the $12,000 range, with larger ones being more, but larger ones being easier for wraps.
Need recommendation for lamination machine. | T-Shirt Forums
2018年2月7日 · Lamination with the VersaCamm would be printing, out gassing, laminating, reloading, aligning, cutting. Something a bit easier with separate print cut machines, but still possible on print/cut combo, if it has good registration/optical eyes. If you just print/cut, its far easier and lasts a reasonable amount of time in the weather.
Need advice between High Quality Heat transfer and...
2022年4月12日 · If you are not familiar with the BN20, it is the only machine I know of that both prints and cuts in the same operation. You will learn to make designs that minimize weeding. The BN20 is not a small machine with a 20" material width. You need a 4 foot wide by 3 foot deep space just for the machine, plus room around it to work.
BN-20 one side cutting is off, one side is not | T-Shirt Forums
2014年2月21日 · Set your printer to "Print Only" on "Print/Cut Options", feed it out a few inches, cut it, then reload and choose "Cut Only", it should then scan for the marks and cut. I find this to be a lot more precise on my cutpaths especially for larger pieces.
Roland BN20 VersaStudio installation and review - T-Shirt Forums
2006年11月15日 · If you can cut it with a vinyl cutter you can the bn. It does print gradients and full color photos. Usually you are using the white media so you don't need to print white but you do have that option in the. Choice of set up. I chose the metallic I think I should have gone with the white for better stickers but I have made due.
Life Expectancy of Wide Format Print/Cut Machine
2013年12月22日 · Vinyl Cutters (Plotters) and Transfers ...
Do I get a vinyl cutter? | T-Shirt Forums
2021年2月24日 · All of which cost pennies per print. Also, a cutter opens up many other avenues as you can cut many materials with it, including sign vinyl, stencil material, magnetic sheet etc, and you can even use engraving tools or embossing (technically 'debossing') tools, or different types of pens. Here's an engraving test I made on 2mm clear acrylic ...