I have a 2013 Ford F150 3.5L engine with multiple codes P0010, P0013, P0020, P0023, P0135, P0141, P0155, P0161, Kenny Z. Auto Trans, Drivability and Electrical Specialist

I have a 2013 Ford F150 3.5L engine with multiple codes P0010, P0013, P0020, P0023, P0135, P0141, P0155, P0161, Kenny Z. Auto Trans, Drivability and Electrical Specialist

10 ford explorer 4.0L P0106 P0135 P0141 P0155 p0161 P0403 Customer brought this vehicle with too many codes what I did Mechanic's Assistant chat Customer: 10 ford explorer 4.0L P0106 P0135 P0141 P0155 p0161 P0403 Customer brought this vehicle with too many codes what I did was I cleared all the codes and then I drove the vehicle for a few miles ...

The P0141 and P2096 are both related. The P0141 is pointing to a problem with the oxygen sensor for Bank-1/Sensor-2 (aka "downstream"). The P0141 states a failure and the P2096 states the sensor is reporting the fuel-air mixture as "lean" indicating the sensor has failed. More commonly here, the oxygen sensor will need to be replaced.

OBD2 code says P0141 bank 1 sensor 1 on on Ford F150 . ttiger79. ASE Master Certified, Advanced Level ...

2009年3月9日 · Code P0141 O2 heater circuit [bank 1, sensor 2] Have changed both sensors located on manofolds. Have not changed sensor located after catalytic converter. Is this a different sensor than the ones mentioned. Trying to correct a high idle. Have changed new parts. MAFIAC trying to get ready to take to Ford Shop to get it reprogramed for idling high.

1996 ford bronco codes p0135 p0141 p0155 put in 3 new h2o sensors, cadalidic converter, new mass air and ...

customer: 2013 ford escape, has set p0010, p0013, p0135, p0141, p0443, p0446. car runs fine, it's hard to believe the car would have this many codes in 3 different systems, replaced vvti solenoids, cleared codes, same codes came back within a few miles.

Customer: I am pulling code P0141 on my 2010 Ford F550. My research led me to believe the problem was with the bank 1 sensor 2 o2 sensor, but after sliding underneath the truck I see that the exhaust combines after the manifolds before leading to a single catalytic converter with 1 o2 sensor mounted in the converter.

30) DTC P0135, P0141, P0155 Or P0161: Check HO2S Heater Signal Circuit DTCs P0135, P0141, P0155 and P0161 received separately indicate a short to ground or open in HO2S heater circuit. DTCs received in pairs, such as P0135 and P0155 or P0141 and P0161, indicate HO2S heater signal circuit shorted to a power source greater than 2.0 volts.