This tool is used for field upgrades of 8-bit AVR microcontrollers with ISP or PDI interfaces. Using the included AVR Studio software, designers can program tinyAVR and megaAVR devices using the ISP Interface, tinyAVR devices using the TPI interface, and …

The Atmel AVRISP mkII combined with Atmel Studio can program all Atmel AVR 8-bit RISC microcontrollers with ISP, PDI, or TPI Interface. Consult the Atmel Studio device support section for a full list of devices and interfaces supported by this firmware release. 1.1. Getting Started.

AVRISP mkII supports all AVR 8-bit RISC Micro Controllers with ISP programming interface. Support for new devices will be added with new versions of AVR Studio.

1.2 Connecting Atmel AVRISP mkII. 1.3 What's New. 2 Hardware Description. 2.1 Atmel AVRISP mkII Block Schematic. 2.2 USB. 2.3 MCU. 2.4 Status LED. 2.5 Target Interface. 2.6 Level Converter. 2.7 Short Circuit Protection. 2.8 ESD Protection. 2.9 Pull-up Resistors. 2.10 Reset Line. 3 Command Line Utility. 4 Troubleshooting.

avrisp mkii是一款用于编程和调试avr微控制器的工具。 它通过USB接口连接到计算机，并与Atmel Studio集成开发环境一起使用，提供了快速，可靠的编程和调试功能。

This section describes how to connect the Atmel AVRISP mkII to the host PC and the target device for correct operation. Note that Atmel Studio and the USB driver must be installed. See the Atmel Studio documentation for help. AVRISP mkII must be connected to the computer before connecting it to the target device. Figure 1-2.

Follow these steps to get started using the AVRISP mkII: Install Atmel Studio and the USB driver. Connect AVRISP mkII to the computer, and auto-install new hardware (AVRISP mkII) on the computer.

Download the latest AVR Studio from the Atmel web site, http://www.atmel.com/products/AVR/. The definition of all commands, responses, parameters and other defined values can be found in chapter 6.1. All device specific values can be found in the XML part description files. See chapter 4 for how to find the parameter values for AVRISP mkII ...

2012年8月10日 · After two days of searching literally hundreds of forums, blogs and spec sheets, I was finally able to get my Atmel AVRISP MKii to work with the Arduino IDE and upload sketches to my breadboarded Mega 328P IC.