p0303 cylinder 3 misfire SOLVED - Hyundai Forums
2021年12月15日 · New part goes on, but issue still continues, still showing #3 misfire. I go through the full line of tests: swapping injectors and plugs, checking for vacuum leaks, testing voltages and resistances of all possible sensors/connectors that everyone has said has been a culprit of their p0303, all to no success. Here comes the part that all I can ...
2010 hyundai accent crank but no start
2018年10月8日 · 2010 hyundai accent crank but no start. I have a 2010 Hyundai Accent 1.6l, I have replaced the camshaft and crankshaft position sensor, the fuel pump and the charcoal canister. The car started and ran for about 25 mins with no problems. Then the car died and will not stay running . It is not showing any codes from the scanner.
2010 Hyundai Accent – CEL (P0496) | Hyundai Forums
2015年11月4日 · 2010 Hyundai Accent – CEL (P0496) My CEL came on several days after a gas station pump slightly overfilled my gas tank, spilling a bit of fuel onto the ground and over the side of my car (my guess is that this was the root cause of my CEL coming on days later). I ran the CEL code at an AutoZone, and it came back as a P0496.
2010 Accent blue hatchback: speaker install (stereo...
2013年12月23日 · Hi all, I figured I'd post this speaker install to resolve some conflicting info online, and so that anyone else doing this on their late 2k model accent would have a good point of reference. The post below will contain pictures of the speakers and the car panels removed. For starters, here are the relevant specs: Front Speakers: Alpine 6.5 inch.
2010 Accent starts and dies - Hyundai Forums
2023年12月21日 · 2010 hyundai accent with 215k 1. Car was doing this so put in new injectors and no change. Was going to be doing them anyway. 2. Fuel Pump is working fine. Has PLENTY of fuel pressure at the fuel rail. Jumped relay and no change either. 3. Unplug crank sensor does not start at all. Plug it back in, start runs for 2 or 3 seconds and dies. 4.
2010 Hyundai Accent ECU Replacement
2019年7月13日 · ECU Engine Control Unit Hyundai Accent 1.4 39101-26AD1 M7.9.8, GMC-644DFS3-5000 39101-26AD1 GMC644DFS35000 3910126AD1 M7.9.8 90309307432A2 KEFICO 2005 It got the same plug and same engine type 1.4L Could anyone confirm if we can make this one plug and play with mine please
2010 Accent Won't start after gas fiil up. | Hyundai Forums
2021年11月18日 · Clamp the hose before filling the tank and see if the engine is able to start normally when your done. If it does you can feel pretty confident that the valve is leaking. The other way is to disconnect the valve harness connector and the hose on the fuel tank side of the valve. Now start the engine and let it idle.
P0620 after 3 alternators and misfires. Bad ecm? - Hyundai Forums
2021年5月26日 · 2010 Accent. Car started to shake and run bad. Hard to start Codes in order - P0620 P0300 P0301 P0303 P0304 Pending P0625 Well the P0620 code is alternator related and can cause misfires hence the later codes so I pul it and have it tested at Advanced Auto. They say it failed. No problem here my core and bought a replacement. Installed, cleared ...
Accent stalls when stopped and idling - Hyundai Forums
2015年2月14日 · 2011 Hyundai Accent. Issue - stall at stops and red lights when the car is at idle. We would have to wait for a couple of mins for the car to cool down to restart. Fix - We just replaced the crankshaft sensor and the engine knock went away after a min or so at idle.
Reset the Throttle body Position and acceleration idle - Hyundai …
2021年1月17日 · HYUNDAI THROTTLE BODY RELEARN PROCEDURE. The battery must read above 10-volts and engine temperature must be above 41.5 degrees for learning to complete successfully. 1) Turn the ignition key ON for at least 10 seconds and then OFF for at least 10 seconds. This procedure allows the ECM to automatically learn the throttle valve position.