CapibaraZero open-source firmware offers a low-cost alternative to Flipper Zero for ESP32-S3 hardware such as the LilyGO T-Embed CC1101.

DC2380A-A，基于 LTC7851EUHH 的演示板，4 相电压模式降压控制器，7V = VIN = 14V，Vout1 = 1.8V @ 30A，Vout2 = 1.5V @ 30A，Vout3 = 1.2V @ 30A，Vout4 = 1V ...

This is a port of Arduino to the RP2040 (Raspberry Pi Pico processor) and RP2350 (Raspberry Pi Pico 2 processor). It uses the bare Raspberry Pi Pico SDK and a custom GCC 14.2/Newlib 4.3 toolchain and ...

open-source hardware Raspberry Pi RP2040 development board with a USB-C port, a 70 (7×10) addressable RGB LED matrix, and two 12-pin GPIO headers for expansion. It can be used for wearables, ...

The STEVAL-MKI185V1 can be plugged into a standard DIL24 socket. The adapter provides the complete IIS2MDC pinout and comes ready-to-use with the required decoupling capacitors on the V DD power ...

This project enables Silicon Labs hardware to be used with the Arduino ecosystem. If you're using your board for the first time with Arduino IDE you need to burn the bootloader first. Burning the ...

Does it bother you that the RP2040’s ADC quality is even further ... Everything worth preserving is preserved – the pinout stays the same, including the SWD connector, which now sports an ...

The Hardware CI Arena allows testing software across a variety of hardware boards such as Arduino, RP2040, ESP32, and more. Here’s the reason it exists: while in theory every OS and piece of ...