许多市场对高效率同相 DC-DC 转换器的需求都在不断增长，这些转换器能以降压或升压模式工作，即可以将输入电压降低或提高至所需的稳定电压，并且具有最低的成本和最少的元件数量。反相 SEPIC（单端初级电感转换器）也称为 Zeta 转换器，具有许多支持此功能 ...

本书主要介绍由ADI工程师亲自参与设计、调试并验证的参考电路。通过这些参考电路，可以将这些产品迅速和放心地组合起来。这些电路为许多通用应用提供解决方案。每款电路包含详细的设计文档，常见电路变化以及更多信息。电路功能和性能已经过硬件验证。

如今，系统板拥有的供电轨和电源的数量越来越多。解决方案的尺寸、效率、热性能和瞬态性能对于高级电源解决方案都非常重要，因此为特定应用设计定制板载电源解决方案比使用现成的商用电源更为有效和经济。对于系统工程师而言，设计和优化开关模式 ...

该计算器可在dBm、dBu、dBV、 V PEAK and V RMS (ANSI T1.523-2001 定义)之间相互转换。dBm是相对于1mW的功率比，dBu和dBV是分别相对于0.775V和1V的电压比。 若要使用此计算器，可在所需部分输入您的应用数据，然后在适当的表格元素中输入需转换的数量。 定位到另一字段 ...

想象未来几十年后的世界，您的孙子们可能不知道医院这个词，所有健康信息都是通过传感器远程记录和监测。想象您的家里配备了不同的传感器来测量空气质量、温度、噪声、光照和气压，并且根据您的个人健康信息，系统调整相关环境参数以优化您的家居 ...

Today’s designs require an increasing number of power rails and supply solutions in electronics systems, with loads ranging from a few mA for standby supplies to over 100A for ASIC voltage regulators.

A reconstruction filter is an important element for creating a clean, low jitter clock signal from a direct digital synthesizer (DDS). A reconstruction filter is used at the output of the DAC to ...

A source measure unit (SMU) is an instrument that combines a sourcing function and a measurement function on the same pin or connector. It can source voltage or current and simultaneously measure ...

Many industries are calling for electronics that can operate reliably in harsh environments, including extremely high temperatures. Traditionally, engineers had to rely on active or passive cooling ...

One common method for determining the tilt or inclination of a system is to integrate the output of a gyroscope. Although this method is straightforward, error ...

UART, or universal asynchronous receiver-transmitter, is one of the most used device-to-device communication protocols. This article shows how to use UART as a hardware communication protocol by ...

For a human, experiencing a fall unobserved can be doubly dangerous. The obvious possibility of initial injury may be further aggravated by the possible consequences if treatment is not obtained ...