焊焊缝

例句

释义:
全部全部
类别:全部全部,口语口语,书面语书面语,标题标题,技术技术
来源:全部全部,字典字典,网络网络
难度:全部全部,简单简单,中等中等,难难
1.
Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.
对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。
2.
No spalled paint exists at the plug weld and for a short distance each side of the plug welds .
在塞焊焊缝处及塞焊周围距离内无细漆碎屑存在。
v2basea1.flashcdnline1.com
3.
Macro slicing of corner welding seam proves that forming and fusion of the welding seam is in good condition.
角接焊焊缝宏观切片检验焊缝成形和熔合情况良好。
img3.zhubajie.com
4.
Produced stress concentration if weld reinforcement too large for submerged arc welding, so it should be control.
埋弧自动焊焊缝余高过大会对压力容器产生应力集中的影响，因此应加以控制。
www.dictall.com
5.
Through designing and making simulation reference block for EBW seam, the ultrasonic C-scan testing method is studied.
设计制作电子束焊焊缝模拟对比试样，利用模拟对比试样研究超声C扫描检测工艺。
www.chemyq.com
6.
This paper introduces the seam tracking technology in arc-swing type TIG welding, which takes the arc voltage as sensor signal.
介绍以弧压为传感信号的摆动式TIG焊焊缝跟踪技术。
www.ceps.com.tw
7.
The influence of Nd: YAG laser on hybrid weld appearance is light in variation of laser-arc distance and defocusing distance.
而在光丝间距和离焦量变化过程中，激光束对复合热源平板堆焊焊缝表面成形的影响很小。
www.csejournal.com
8.
The hardness of thick plates joint shows that there is big difference in mold of vertical thermal cycle using laser-arc hybrid welding.
接头硬度表明厚板激光复合焊焊缝纵向热循环模式存在较大差异。
rjggy.net
9.
Effective loading section area of backing weld was too small to stand larger stress after welding, which caused the crack.
打底焊裂纹是由于打底焊焊缝有效承载面积较小，不足以承受焊后较大的应力所致，通过采用“厚壁保强”法，解决了此问题。
rjggy.net
10.
Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.
因此，断裂可能是由于从塞焊焊缝内的焊渣和气孔外形成的尖锐的疲劳裂纹而产生的。
www.jukuu.com