孔孔径

例句

释义:
全部全部
类别:全部全部,口语口语,书面语书面语,标题标题,技术技术
来源:全部全部,字典字典,网络网络
难度:全部全部,简单简单,中等中等,难难
1.
Crater radius is one of the important design parameters for the penetration in concrete target by shaped charge jet.
扩孔孔径大小是聚能装药侵彻混凝土目标的重要设计参数之一。
lib.cqvip.com
2.
Among them, the inlet and outlet throttle hole diameters of the control volume are the key for the better injection performance.
其中，控制室进出口节流孔孔径的合理匹配和组合对获得良好的喷油特性尤为关键；
www.ceps.com.tw
3.
However, further increase in mesopore size led to a decrease in the reaction rate, which is due to low surface area of the MOF material.
然而，进一步的增加介孔孔径，多级孔道金属-有机骨架的比表面积降低，导致反应速率的降低。
www.fabiao.net
4.
The method can control the density and aperture of the foams, thus the microcellular foams can be produced by the subsistent extruder.
此方法可以有效控制发泡材料泡孔密度和泡孔孔径范围，并可以应用现有挤出机，降低设备成本。
www.juhe8.com
5.
The result indicated that the ability of new crystal formation was different from pore size of porous calcium phosphate ceramics.
实验结果表明不同大孔孔径的钙磷多孔陶瓷形成新晶体的能力不同；
www.juhe8.com
6.
Patterns of pore size-pore volume distributions of activated carbons from different sources are summarized.
同时还对各类活性炭的微孔孔径-孔容分布提出一些规律性的结论。
www.chemyq.com
7.
Of the factors affecting adsorptive capacity of adsorbents , the micropore of 0. 85nm diameter is quite important.
在影响单位体积吸附剂贮气性能的几个要素中，吸附剂的微孔孔径最为重要。
dictsearch.appspot.com
8.
Stress whitening of foamable copolymer can increase the nucleation process during foaming and decrease the cellular diameter greatly.
可发泡共聚物的应力发白现象能改善其发泡成核效果并使泡孔孔径大大减小；
www.ceps.com.tw
9.
Higher foaming pressure will lead to smaller cell size. However, too high foaming pressure may lower the void fraction.
增大发泡压力有利于减小泡孔孔径，但压力过高会降低发泡硅橡胶的孔隙率。
d.wanfangdata.com.cn
10.
Whether it is tubular, flat-shaped or flat-complex, it can be made into different capillary sizes.
无论管形、平板形或平板复合形，均可制成不同的微孔孔径。
www.zyzhan.com